Esky belt cp v211/19/2022 ![]() ![]() Attention: Adjust the knob to limit the tail servo range within the maximal displacement range of the tail pitch sliding bush when the rocker of the tail servo being moved to both left and right fully, by doing this, the range of tail servo won't exceed the limitation so as to protect the servo and the link lever when flying. When "-" (counterclockwise) decrease the range of tail servo will decrease. When "+" (clockwise) increase the range of tail servo will increase. C: Limit (Servo range control) Limit: Adjust the maximal range of tail servo A. Please double check to make sure that the action direction of the gyro is correct. ![]() The wrong setting will cause the helicopter dangerous with high-speed self-rotation when flying. Otherwise, you should switch the Normal and Reverse Switch of gyro. If the direction of the tail servo turns is in accordance with the transmitter's stick turns, it indicates that the initialization setting is right. REV: Reverse motion NOR: Normal motion Attention: When checking the action direction of Gyro, lift up the helicopter and let the head of the helicopter turn left. B: REV/NOR (Normal and reverse switch) REV Switch: reversing switch for gyro adjust the tail servo's direction. The faster the helicopter's main rotors rotate the tail servo's responds will be stronger, tfore, the gain of gyro should be reduced. generally speaking, the faster the tail servo responds, the gyro's gain will increase. A: Delay (Gyro Gain adjustment ) A."+"(clockwise) increase the ability of gyro to balance the helicopter (stable but less active): B"-" (counterclockwise) decrease the ability of gyro to balance the helicopter (active but less stable) Attention: When adjusting the gain of Gyro, the gain is differs when applied with different servos or different helicopters. When the tail stops rotating, the servo judges that it has stopped in that position. Also when the tail of the helicopter rotates, the servo also rotates in accordance with angle of rotation of the tail. The gyro itself will automatically auto trim to keep the helicopter flying in the same direction ie keep a heading locked. This stops drifting of the tail even in moderate/strong cross-winds. ![]() Product Features: When the helicopter encounters a cross-wind and the tail drifts, a control signal from the gyro computes the drift angle and constantly outputs a control signal that resists the cross-wind. Intermittent flashing CH5 isn't connected well, or it moved to the middle during initializing. Slow flashing Gyro can not receive the tail servo control signal from transmitter. ![]() Extinguishing Power off or the gyro is unlocked. Product Features: Esky EK2-0704B Head Lock Gyro input signal:1.5-+0.5mx input power 5v-6vdc weight:12.5g size:27*28.5*18mm Display status Status of Gyro Fast flashing After powering on, the gyro is initializing. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |